*Clinker thermal panels are complex structures designed to decorate the facade, and also serve as an insulating material.

Clinker thermal panels perfectly imitate brickwork. Typically, these products use three material options: polyurethane foam, expanded polystyrene foam or extruded polystyrene. They differ from each other in production technology.

So, for example, a clinker tile is pressed into the foam plastic to a thermal panel with expanded polystyrene using a one-component polyurethane adhesive. The glue penetrates deeply into the structure of the components and its polymerization is carried out. Due to this, a single structure of increased strength is formed: clinker and insulation.

It is important to note that such a design – 3 in 1 – turns out to be an excellent option for replacing a separate insulation (brick).

*We produce thermal panels according to the European technology of multiple pressing, which is more than 50 years old. We use exclusively European certified raw materials (see our test videos). We carry out quality control at every stage of production.

For example, a manufacturer of polyurethane adhesive guarantees its properties for 35 years.

Clinker tiles, in principle, have no service life, tk. this is a natural material – sintered and pressed clay at a temperature of 2000 degrees! And as you know, clay retains its physical properties for thousands of years …

The service life of clinker thermal panels is more than 50 years.

The specialists of our company will calculate the required insulation (in particular, the thickness) based on the requirements of the legislation. By the way, you can see the formula for calculating the thickness of the insulating layer based on energy efficiency standards in the document THERMAL INSULATION OF BUILDINGS DBN V.2.6-31:2006.

*Thermopanels can be installed at sub-zero temperatures down to -14°C. All-weather installation, both in hot summers and in cold winters, is a distinctive feature of our facade insulation technology, since a special “dry technology” is used.

However, it is not recommended to install clinker thermal panels during precipitation – snow, rain. Grouting is carried out from +5 degrees Celsius. For example, panels can be installed in winter (besides, the price is more affordable in winter), and grouting can be done in spring.

However, it is not recommended to install clinker thermal panels during precipitation – snow, rain. Grouting is carried out from +5 degrees Celsius. For example, panels can be installed in winter (besides, the price is more affordable in winter), and grouting can be done in spring.

*Based on our experience, the cladding is influenced by several factors at once – the type of construction, the object and the ability of specialists. If installers have no experience with thermal panels, then it will take some time to train them. Therefore, we recommend contacting experienced contractors. On average, a team with installation experience of 2-3 specialists will need a month of work (this is a turnkey solution).

If you buy thermal panels from us, then we offer you “supervised installation” – this is the service of the visit of our master, who works with builders throughout the day.